How to Install Dryer Fabric

Step 1: The paper machine that originally used dryer canvas and dryer felt can now use polyester dryer fabric without modification. If possible, the original split flower roller can be changed to a flat roller and the original blanket drying cylinder can be removed. Step 2: The endless dryer fabric is circular. Before starting the machine, first remove the inner guide roll and pull the dryer fabric along the usage position, then reinstall the inner guide roll and adjust the tension of the dryer fabric to 2-3KN/M before starting the machine. Step 3: The seamed dryer fabric is in the form of a strip, and the two ends of the fabric are connected by spiral rings. When entering the machine, start from one side. When connecting the two ends head to head, thread the connecting wire from one side to the other. If it is difficult to thread at once, it can be threaded in sections, but the connecting wire must not be cut off. The two ends of the connecting wire should be reversed into the interface to prevent it from coming out. At the same time, it is strictly prohibited to have incorrect loops, missing loops, and merging loops, in order to avoid affecting the service life of the dryer fabric.